Danfoss TripleLynx CN Manual de usuario descargar pdf (Pagina 30)

Illustration 6.2: PV Array

Item Unit Description

PV1 array area

Input 1 - total PV array area

PV1 array power W Input 1 - total rated output of PV panels

PV2 array area

Input 2 - total PV array area

PV2 array power W Input 2 - total rated output of PV panels

PV3 array area

Input 3 - total PV array area

PV3 array power W Input 3 - total rated output of PV panels

6.1.3.

Environment

[0] [Plant, Inverter]

Via the environment menu in plant view, the values for total reimbursement and total CO

emis-

sion can be configured.

Illustration 6.3: Calculation Values

Item

Unit Description

Start value for yield count kWh Defines the value (an offset) from where the yield

count used in the calculation of reimbursement and

emission begins.

Reimbursement ct/kWh Euro cent per KWh Defines a value for the financial yield.

Note: Defining this value requires considerable knowl-

edge of the individual reimbursement models of the

different countries. The default value is 0.00.

emissions factor CO

/kg Allows the conversion of yield/kWh. This calculation

factor for CO

saving depends on the energy source to

power generation ratio. Per default it is set to 0.5 C0

kg. Ask the local electricity provider for an exact value.

6. Setup

L00410583-01_02 29

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 68 69

Sin comentarios

Danfoss TripleLynx CN Manual de usuario Pagina 30