Danfoss DLX 4.6 Guía de usuario Pagina 58
- Pagina / 86
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
58 User Guide DLX Series L00410623-1
Power Saving during night
time
Power saving can either be ON or OFF during nighttime. Enabling this
option turns the GUI off 15 minutes after the inverter enters OFF mode, ie.
night time, to save power. Only applicable for client inverters
6.1.4.2. Network Setup
Network Setup displays the settings for the connected network, which can all be changed
with the Owner password. Refer to 6.2. Connection between Inverter and Computer.
NOTICE
All IP addresses related to the inverter and web must be configured with numbers!
Network IP-Address
[Static/DHCP]
Unique network address for the inverter [Indicates whether the IP address is
static or dynamically assigned]
Network Subnet Mas
k
Determines what subnet the IP-address belongs to
Network Gateway
Network point acting as entrance to another network
DNS IP
The DNS IP address
Bus ID (RS-485)
The inverter’s identification number on the RS-485 bus
RS485 bitrate
Measurement of data transmitted in a given amount of time [bps]
RS485 parity
Error detecting code: A bit that ensures an odd or even number of bits in a
set of bits with value one. Selection: None, Odd, or Even
Bus ID (CAN)
The inverter’s identification number on the CAN bus
Set as Master unit
Several inverters connected together in a power control and monitoring
system, must have one master inverter and the rest must be follower
inverters.
6.1.4.3. Inverter Setup
Inverter Setup displays the various data for the specific inverter set during the manufacturer
process, and is read-only.
Model
Inverter model
Serial Number
Unique identifier for each inverter. Also to be found on the product label
DLX Part No.
Identifier for each inverter hardware configuration within Danfoss
DL
X
Revision
Unique version name for keeping track of the development of different
inverter revision
GUI Software Part No.
The GUI
1
software part number.
GUI Software Revision
Revision number for the GUI software
GUI Hardware Part No.
Identifier for the GUI-card hardware
GUI Hardware Revision
Revision number for the GUI hardware
SW1 Part No.
The DSP1
2
software part number.
SW1 Revision
Revision number for the DSP1 software
Control Board Part No.
DSP-card hardware part number
Control Board Revision
Version name for the DSP control card hardware
Main Board Part No.
Identifier for the PCB
3
hardware.
Main Board Hardware Revision
Unique revision number for keeping track of the development of different
main board revisions
SW2 Part No.
The DSP2 software part number
SW2 Revision
Revision number for the DSP2 software
1. GUI = Graphical User Interface, which allows interaction with the inverter through the display.
2. DSP = Digital Signal Processing, which is a microprocessor controlling the power conversion in the inverter.
3. PCB = Printed Circuit Board, which hosts all the components and subsystems of the inverter.
- User Guide 1
- 1. INTRODUCTION 4
- 2. PRODUCT OVERVIEW 5
- 2.3. Symbols Used 6
- 2.3.1. Labels 7
- 2.4.1. Shipping Damage 8
- 2.4.3. Unpacking 9
- 2.4.4. Scope of Delivery 9
- 2.4.5. Inverter Structure 9
- 2.4.5.2. Front Covers 10
- WARNING 10
- CAUTION 11
- 3. SAFETY PRECAUTIONS 12
- 3.1.2. Operation 13
- 3.1.3. Maintenance 13
- 3.2. Site Preparations 14
- 3.2.2. Installation 15
- Systems 16
- 3.3.2.1. AC Fuses 17
- 4. INSTALLATION 18
- 4.2.1. Wall Bracket 19
- 4.2.2. Inverter 20
- 4.3.1. Conductors 22
- 4.3.2. Connection Area 23
- 4.3.3. Grounding 23
- 4.3.4. DC Connections (PV) 24
- 4.3.4.2. Stringbox 25
- 4.3.6. Network Connections 31
- 5. START UP 36
- 5.2.2. User Interface 37
- 5.2.3. Function Keys 38
- 5.2.4. Software Installation 39
- 5.3. Self Test for Italy 47
- 5.3.1. Start 48
- 5.3.2. Voltage Monitoring 49
- 5.3.3. Frequency Monitoring 50
- 5.3.4. Finish 51
- 6. OPERATION 52
- 6.1.2. Home 53
- 6.1.2.1. Upper Display Area 54
- 6.1.3. Status 55
- 6.1.3.1. Active Alarms 56
- 6.1.3.2. Inverter Status 56
- 6.1.3.3. Plant Status 56
- 6.1.4. Setup 57
- 6.1.4.2. Network Setup 58
- 6.1.4.3. Inverter Setup 58
- 6.2.4.4. Plant Setup 59
- 6.2.4.5. Grid Setup 59
- 6.2.5. Commands 62
- 6.2.6. Alarm Setup 63
- 6.1.6.2. Inverter Alarms 64
- 6.1.6.3. Portal Setup 64
- 6.2.7. Event Log 65
- 6.2.8. Statistics 65
- 6.3.1. Without a Network 66
- 6.3.2. With a Network 67
- 6.4. Internal Web Server 69
- 6.4.2. Statistics 70
- 6.4.3. Setup 71
- 6.4.4. Event Log 72
- 6.4.5. Status 73
- 7. TROUBLESHOOTING 74
- 8. MAINTENANCE 78
- 8.2.7. Fan 80
- 8.2.9. Varistors (VDR) 80
- 8.2.9.2. AC Side 81
- 8.3. Replace Devices 83
- 8.4. Return and Disposal 83
- 9. WARRANTY 84
- 10. TECHNICAL DATA 85
- Danfoss Solar Inverters A/S 86
Relacionado con productos y manuales para Adaptadores E Inversores De Energía Danfoss DLX 4.6
Adaptadores E Inversores De Energía Danfoss VLT HVAC Basic Drive FC 101 Especificaciones
(124 paginas)
(124 paginas)
Adaptadores E Inversores De Energía Danfoss FC 300 Interbus Instrucciones de operaciones
(45 paginas)
(45 paginas)
(1 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.077 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales