Danfoss DLX 4.6 Guía de usuario descargar pdf (Pagina 18)

18 User Guide DLX Series L00410623-1

4. INSTALLATION

This chapter describes how to install the inverter correctly, both mechanically and

electrically, and details important issues related to the installation. This information is

addressed to qualified persons, who are educated in installing high voltage electrical

equipment and who follow the installation order as described in this User Manual.

DANGER

All work on the inverter must be performed with all voltage and current sources

disconnected, as contact with live wires may cause serious injury or death!

NOTICE

The Safety Precautions (Refer to 3. Safety Precautions) and the following detailed

installation procedures in this chapter must be read carefully prior to installation.

4.1. Checks prior to Installation



Make sure that both the AC circuit breaker(s) and the DC switch(es) are OFF to prevent

shock hazards during the installation of the inverter.



Check that the PV and the grid specifications are compatible with the inverter

specifications. Refer to 10. Technical Data.



All electrical installations shall comply with the current local and national electrical

regulations at the installation site.

4.2. Mechanical Installation

The mounting surface and the mounting method must be suitable for the inverter’s

weight, dimensions and possible housing temperature. Refer to 10.Technical Data.

WARNING

Follow the installation instructions carefully to prevent poor performance or

possible lethal consequences.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 85 86

Sin comentarios

Danfoss DLX 4.6 Guía de usuario Pagina 18