Danfoss VLT 8000 AQUA Instrucciones de operaciones descargar pdf (Pagina 14)

13

MG.60.N2.02 - VLT is a registered Danfoss trademark

VLT

®

5000 / VLT

®

6000 HVAC / VLT

®

8000 AQUA

• Lift control card cassette from bottom.

• Unplug two ribbon cables (A) and (B)

from control board.

• Unhinge cassette at top to remove.

3. Remove

Cassette

and Ribbon

Cables

NOTE

Ribbon cables will need to be

reconnected to same connec-

tions from which removed.

4. Chassis

Ground

Connections

• Location of holes to mount grounding

strips can vary with drive configuration.

When applicable, remove mounting

screws and washers located in chassis

using Torx T-20 screw driver and save

for reassembly. Otherwise, grounding

strips attach with screws and washers

provided, as shown in step 5.

NOTE

Ground strips are used on 208 V

drives of 22 kW (30 HP) or less

and on 460 V drives of 45 kW

(60 HP) or less. For all other

drives, go to step 6.

(A)

(B)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comentarios a estos manuales

Sin comentarios