
AMB162/182
24Vac/dc or 230Vac versions•
3 Point control•
0-10V or 2-10V control•
Available with or without limit •
switches
Linkage kits for variety of valves •
available
The AMB162 actuator is designed
for operation in central heating
systems in conjunction with either 3
or 4 port rotary valves (HRE/HFE). The
actuators are suitable for connection to
controllers using either 3 point control,
standard voltage or current output
(0-10v or 2-10v selectable).
Mounting is achieved using the linkage
kit (MS-NRE supplied) and is suitable for
a range of manufacturers valves as well
as the Danfoss HRE and HFE models.
See table for more details on linkage
kits.
Technical Data
Supply voltage 24Vac/Vdc,230Vac50-60Hz
Power consumption 2.5VA (5 Nm) and 3.5 VA (10/15 Nm)
Operating torque 5, 10 or 15 Nm
Wire 2 m (3 x 0.5mm
2
)
Actuator limit switch 2 A/250 Vac
Control mode 3-point or 0-10 V/2-10V
Rotation angle Electrically limited to 90°
Manual operation Mechanical disengagement
Ambient temperature (during operation) 0°C to 50°C
Transport and stock temperature -10°C to +80°C
Protection class II (without earthing wire)
Enclosure IP42
Weight 0.46 kg AMB 162 / 0.54 kg AMB 182
Type Supply Voltage Torque Speed Control Signal Remark Code No.
AMB 162 24 Vac 5Nm 140 s 3-point - 082G403000
140 s S* 082G403100
230 Vac 70 s - 082G403200
140 s - 082G403400
140 s S* 082G403500
670 s - 082G404000
24 Vac/Vdc 140 s 0-10 V - 082G405000
AMB 182 24 Vac/Vdc 15Nm 140 s 0-10 V - 082G405500
280 s - 082G405600
24 Vac 10Nm 70 s 3-point - 082G406200
15Nm 280 s - 082G406400
230 Vac 10Nm 70 s - 082G406700
15Nm 280 s - 082G406900
280 s S* 082G407900
S* Complete with aux. switch
Linkage Kits
Mounting Kit Make Type Code No.
MS-NRE
Danfoss HFE (HRE old, HRB old)
082G423000
ESBE
MG, G, F, T, TM
H, HG
TA VRTE
Termomix B, C, D
Sauter MH32, MH42
MS-NRE6-D Danfoss HRB 082G423500
Accessories
Type Description Code No.
AUX Switch Auxiliary signal switch 082G401200
Electrical Actuator
AMB 162 & AMB 182
Comentarios a estos manuales