Danfoss DLX 4.6 Guía de instalación descargar pdf (Pagina 36)

36 Installation Guide DLX series L00410622-01

Warning Box

Errors:

1. No communication

2. Wrong grid settings

• Check the LEDs on the inverters. If the yellow and red are lit check that the installation is

correct performed and that the grid settings are correctly set.

• If the ‘Start Installation’ screen is still shown, run through the installation process on the

inverter.

3.2. Self Test for Italy

The Self Test function is only valid for installation in Italy. It tests the inverters’ grid

monitoring function of voltage and frequency, and takes approximately 2 minutes.

NOTICE

The Self-Test can only be activated when:

•

The installation procedure is executed.

•

The country setting is set to Italy.

•

The inverter is in Running/Derating Mode.

Select: Commands>Inverter Commands>Self Test

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Sin comentarios

Danfoss DLX 4.6 Guía de instalación Pagina 36