Danfoss VLT HVAC Basic Drive FC 101 Información técnica descargar pdf (Pagina 55)

13-40 Logic Rule Boolean 1

Array [6]

Option: Function:

[23] Comparator 1 Use the result of comparator 1 in the

logic rule.

[24] Comparator 2 Use the result of comparator 2 in the

logic rule.

[25] Comparator 3 Use the result of comparator 3 in the

logic rule.

[26] Logic rule 0 Use the result of logic rule 0 in the logic

rule.

[27] Logic rule 1 Use the result of logic rule 1 in the logic

rule.

[28] Logic rule 2 Use the result of logic rule 2 in the logic

rule.

[29] Logic rule 3 Use the result of logic rule 3 in the logic

rule.

[30] SL Time-out 0 Use the result of timer 0 in the logic

rule.

[31] SL Time-out 1 Use the result of timer 1 in the logic

rule.

[32] SL Time-out 2 Use the result of timer 2 in the logic

rule.

[33] Digital input DI18 Use the value of DI18 in the logic rule

(High = TRUE).

[34] Digital input DI19 Use the value of DI19 in the logic rule

(High = TRUE).

[35] Digital input DI27 Use the value of DI27 in the logic rule

(High = TRUE).

[36] Digital input DI29 Use the value of DI29 in the logic rule

(High = TRUE).

[39] Start command This logic rule is TRUE if the frequency

converter is started by any means

(either via digital input, or other).

[40] Drive stopped This logic rule is TRUE if the frequency

converter is stopped or coasted by any

means (either via digital input, or other).

[42] Auto reset trip This logic rule is TRUE if the frequency

converter is tripped (but not trip-

locked) and an Automatic Reset is

issued.

[50] Comparator 4 Use the result of comparator 4 in the

logic rule.

[51] Comparator 5 Use the result of comparator 5 in the

logic rule.

[60] Logic rule 4 Use the result of logic rule 4 in the logic

rule.

[61] Logic rule 5 Use the result of logic rule 5 in the logic

rule.

13-40 Logic Rule Boolean 1

Array [6]

Option: Function:

[70] SL Time-out 3 Use the result of timer 3 in the logic

rule.

[71] SL Time-out 4 Use the result of timer 4 in the logic

rule.

[72] SL Time-out 5 Use the result of timer 5 in the logic

rule.

[73] SL Time-out 6 Use the result of timer 6 in the logic

rule.

[74] SL Time-out 7 Use the result of timer 7 in the logic

rule.

[83] Broken belt A broken belt condition has been

detected. This function must be

enabled in 22-60 Broken Belt Function.

[100] Firemode The frequency converter is operating in

fire mode. See parameter group 24-0*

Fire Mode

13-41 Logic Rule Operator 1

Option: Function:

[0] * Disabled

[1] AND

[2] OR

[3] AND NOT

[4] OR NOT

[5] NOT AND

[6] NOT OR

[7] NOT AND NOT

[8] NOT OR NOT

13-42 Logic Rule Boolean 2

Array [6]

Option: Function:

Select the second boolean (TRUE or

FALSE) input for the selected logic

rule.

See 13-40 Logic Rule Boolean 1 for

further descriptions of choices and

their functions.

[0] * False

[1] True

[2] Running

[3] In range

[4] On reference

[7] Out of current range

[8] Below I low

[9] Above I high

[16] Thermal warning

[17] Mains out of range

Parameters VLT HVAC Basic Drive Programming Guide

54 MG.18.B1.02 - VLT

is a registered Danfoss trademark

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 98 99

Comentarios a estos manuales

Sin comentarios

Danfoss VLT HVAC Basic Drive FC 101 Información técnica Pagina 55

Comentarios a estos manuales