Danfoss VLT HVAC Basic Drive FC 101 Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
VLT® HVAC drive allows you to rethink your compressor operation. Flexible compressor mode operation even above
nominal speed and high break away torque for
start-ups allow for better control and major
savings.
The VLT® HVAC Drive has been design-
ed to off er exible, intelligent control
of scroll, screw and centrifugal com-
pressors, making it even easier to
optimize cooling capacity with con-
stant temperature and pressure levels
for water chillers, and other typical
compressor applications in HVAC.
Replace a cascade with
a single compressor
The VLT® HVAC Drive provides the
same level of fl exibility with one large
compressor instead of a cascade
of 2 or 3 smaller compressors.
The HVAC Drive operates all
compressors at a far more re-
ned range of speeds than
normal – even above
nominal speed – meaning
that one large compressor is
now enough.
Dedicated compressor features
Set point in temperature
The VLT® HVAC Drive calculates the
actual room temperature from the
pressure in the cooling media and
refi nes compressor operation accord-
ingly – without the need for addition-
al software, sensors or controllers.
This calculation is also applicable to
the set point as well, so the desired
temperature is set via the Local
Control Panel – and not a pressure
value.
Fewer starts and stops
A maximum number of start/stop
cycles within a given period of time
can be set via the Local Control Panel.
Since start-up is the most critical part
of compressor operation (all parts of
the unit are under mechanical stress
before the system is suffi ciently lubric-
ated) this extends compressor
lifetime.
Quick start-up
To extend life even further, the VL
HVAC Drive opens a bypass valve and
lets the compresser start quickly
without load.
The VLT® HVAC Drive provides 130%
break away torque and can give 110%
torque for 60 seconds in normal ope-
ration. This torque demand would
normally require larger and more ex-
pensive drives.
13
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comentarios a estos manuales

Sin comentarios