Danfoss TP5000 si range Manual de usuario descargar pdf (Pagina 2)

The TP5000 Si is an easy to install-and-use 5/2 day

programmable room thermostat which o ers up

to six time and temperature changes each day with

di erent programmes for weekdays and weekends.

However the TP5000 Si goes far beyond this. Mains

or battery powered for ease of installation, the

TP5000 Si has a large, easy-to-read LCD display. It is

easy to programme and operate because of a built-

in switching programme that the user can easily

change to suit individual heating requirements.

The TP5000 Si is also available in battery powered,

hard-wired and wireless (RF) versions. A big plus

with the TP5000 Si is that it incorporates a real time

clock and calendar function which eliminates the

need for time-setting and BST/GMT time changes.

Time and date are factory-set making time setting

or adjustment unnecessary.

Chrono-proportional control is the standard setting

for the TP5000 Si but advanced conventional

ON/OFF control is an installer-set option. This

modulating control mode uses a cycling pattern

within which boiler on/o percentages are varied

to satisfy heating requirements.

Chrono-proportional cycling rates

of 3, 6, 9 or 12 per hour can be

selected.

Service Interval function

The optional Service Interval

function incorporated into the

TP5000 Si helps landlords meet

the boiler servicing requirements

of Gas Safety Regulation 36. The

unit provides audible and visual

warnings from 28 days before servicing is due and

ultimately reduces the heating output should the

due date pass. Full heating operation can only be

restored by an authorised installer.

Other features

Some other features of the TP5000 Si are:

• Mains, battery-powered hard-wired and RF

versions.

• Selectable 6, 4 or 2 events per day.

• Programmable remote sensor inputs including

remote room sensing, limit sensing for  oor

heating applications and tele-switch or window

switch sensing.

• Selectable operating modes 5/2 day, 24 hour or

A/B block programming.

• Fixed time, delayed start or optimum start options.

• All user settings, including overrides, stored in non-

volatile memory independent of battery state.

• Thermostat mode and frost protection.

TP5000 Si Range

Electronic Programmable Thermostats

Hard-wired versions TP5000 Si TP5000A Si TP5000M Si TP5000MA Si

(3)(4)

Code No. 087N791000 087N791100 087N791700 087N791800

Wireless versions TP5000-RF Si TP5000A-RF Si - -

Code No. without receiver 087N791200 087N791300 - -

Code No. for set c/w single channel receiver 087N791400 - - -

Programmable 5/2 day operation • • • •

Number of events per day 6, 4 or 2 6, 4 or 2

Temperature range O , 5-30°C O , 5-30°C

Clock display 24 hour 24 hour 24 hour 24 hour

Factory pre-set programmes Yes Yes

Room temperature override Yes Adjustable Yes Adjustable

Display time or temperature option Yes Yes

Thermostat mode & frost protection Yes Yes

Weekend into weekday override Yes Yes

Chrono-proportional or on/o control

option

Yes Yes

Power supply, thermostats 2 x AA/MN1500/LR6 alkaline batteries

(1)

230Vac, 50Hz

Maximum ambient temperature 45°C 45°C

Contact type and rating (hard-wired models) 10-230 Vac, 3(1)A 10-230 Vac, 3(1)A

Transmitter/receiver frequency (RF models) 433.92 MHz - -

Transmitter range (RF models) 30 metres max.

(2)

- -

Dimensions (mm) 110 wide x 88 high x 28 deep 110 wide x 88 high x 28 deep

Notes:

(1) Memory is retained for life of the product in non-volatile memory.

(2) Please ensure there are no large metal objects between thermostat and receiver as these will interfere with radio signal.

(3) Can be con gured by installer for remote temperature sensor, limit sensor, window contact or telephone activated switch contact.

(4) Remote sensor is supplied as an acessory, if remote room sensor is required order TS2 sensor, code 087N681100

Receivers (RF models) RX-1 RX-2 RX-2C RX-3

Code No. 087N747600 087N747700 087N747900 087N747800

Number of zones receiver covers 1 2 2 3

Power supply (receivers) 230 Vac, ±15%, 50/60 Hz

Contact details 1-SPDT 1-SPDT, 1-SPST 2-SPDT 1-SPDT, 2-SPST

Contact rating 10-230 Vac, 3(1)A

Dimensions (mm) 138 wide x 88 high x 32 deep

TP5000-RF Si &

RX1 Receiver

087N791400

warnings from 28 days before servicing is due and

ultimately reduces the heating output should the

due date pass. Full heating operation can only be

TP5000-RF Si &

RX1 Receiver

087N791400

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Danfoss TP5000 si range Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Termostatos Danfoss TP5000 si range