Danfoss EFIT 550 Guía de usuario descargar pdf (Pagina 16)

2.0 System overview

2.1 Three diﬀerent sensor conﬁgurations

FS: Floor sensor (comfort heating)

Suitable for ﬂoor heating in e.g. bathrooms. The built-in •

room sensor is not used.

Comfort heating should be used only to supplement a •

regular room heating system.

RS: Room sensor (total heating)

Suitable for control of room temperature in e.g. living •

rooms. Unsuitable for wet rooms.

The thermostat must be mounted in the same room as the •

heating elements.

RFS: Room and ﬂoor sensor (total heating)

Suitable for control of room and ﬂoor temperature in e.g. •

living rooms. Unsuitable for wet rooms.

The ﬂoor sensor monitors the ﬂoor temperature, limiting •

heating element temperature to avoid risk of ﬁre and to

protect ﬂooring from excessive temperatures.

The maximum ﬂoor temperature must be set (see section •

4.6 below). It is also possible to set the minimum ﬂoor

temperature (see section 2.1.4 of the User guide).

The thermostat must be mounted in the same room as the •

ﬂoor sensor and heating elements.

2.2 Network

Up to 32 thermostats can be linked in a network. •

See section 5.1.

Installation manual

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Danfoss EFIT 550 Guía de usuario Pagina 16